A recruiter SLA sets who does what in hiring and how fast, on both the recruiter and hiring manager side. Use the template, responsibilities table, metrics and rollout plan below.
- A recruiting SLA must bind both sides: recruiter deliverables and hiring manager response times. One-sided SLAs fail.
- Keep it to one page: roles, process steps, turnaround times, metrics, escalation and a review date.
- Set targets from your own recent data, not from someone else’s benchmark, then tighten them after a pilot.
- Track a few timestamps (intake, slate sent, feedback received, interview, offer) so you can see exactly where time is lost.
- Pilot with two or three willing hiring managers for 60 to 90 days before rolling it out company-wide.
In this article
A recruiter SLA (service level agreement) is a short written agreement between recruiters and hiring managers that sets who does what in the hiring process and how fast: for example, recruiters send a first slate within a set number of days, and managers give feedback on candidates within 48 hours. It turns vague expectations into shared, measurable commitments on both sides.
What a recruiter SLA is and why it helps
Many hiring delays come from waiting rather than from a lack of candidates: for a job description to be approved, for a manager to review resumes, for interviewers to find a free hour, for an offer to be signed. A hiring manager SLA makes those waits visible and agreed in advance.
SHRM’s guide to recruiting service-level agreements recommends defining each party’s responsibilities, listing process steps in order, setting deadlines and deliverables, deciding how success will be measured, and spelling out what happens when commitments are missed. One employer it profiles committed to reviewing resumes within 24 hours and targeted about 27 days from application to offer.
An SLA is an internal working agreement, not a legal contract. Its value is clarity: everyone knows what “fast” means and who is holding things up.
Recruiter and hiring manager responsibilities
The table below gives starting-point targets for a typical professional role. They are suggestions to adjust, not industry benchmarks. Set yours from what your team achieves today.
| Stage | Recruiter commits to | Hiring manager commits to | Example target |
|---|---|---|---|
| Intake | Schedule intake within 2 business days of an approved requisition; send written summary after | Attend intake; confirm must-have skills, pay range, interviewers and timeline | Intake held within 2 business days |
| Job posting | Draft posting and start sourcing | Approve posting | Live within 2 business days of intake |
| First slate | Present screened candidates with short notes | Review every candidate presented | 3 to 5 candidates within 7 to 10 business days |
| Resume feedback | Follow up after 24 hours if no response | Yes / no / maybe with a reason for each candidate | Within 2 business days |
| Interview scheduling | Coordinate times and send candidates prep information | Hold interview slots each week; make interviewers available | First interview within 5 business days of approval |
| Interview feedback | Collect scorecards, chase missing ones | Each interviewer submits a scorecard | Within 1 business day of interview |
| Decision | Run debrief; gather references | Make hire/no-hire decision | Within 2 business days of final interview |
| Offer | Prepare and extend offer; manage negotiation | Approve offer terms; join the call for key roles | Offer out within 2 business days of decision |
| Candidate updates | Update every active candidate at least weekly; close out rejected candidates | Share decisions promptly so updates are accurate | No active candidate without contact for 7+ days |
Use a structured intake meeting agenda so the first commitment starts with a clear brief, and a shared interview scorecard so feedback arrives in a usable format.
Recruiter SLA template (copy and edit)
Recruiting service level agreement
Parties: [Talent acquisition team / recruiter name] and [Department / hiring manager name]
Scope: All requisitions for [department or job family] opened between [start date] and [review date]. Excludes executive and confidential searches.
Shared goal: Hire qualified people for approved roles within [X] business days of requisition approval, with a fair and consistent process and a good candidate experience.
Recruiter commitments: intake within [2] business days; posting live within [2] business days of intake; first slate of [3-5] screened candidates within [10] business days; scheduling within [5] business days of approval; offer issued within [2] business days of decision; weekly status update to the hiring manager every [day].
Hiring manager commitments: attend intake with a confirmed pay range and interview panel; give feedback on presented candidates within [2] business days; keep [2] interview slots open per week; ensure interviewers submit scorecards within [1] business day; decide within [2] business days of final interviews.
Measurement: recruiter tracks dates for each stage in [ATS / shared tracker]; results reviewed [monthly] by both parties.
When a commitment is missed: recruiter sends a reminder after the deadline; if still open after [2] more business days, escalate to [HR business partner / department head]. If a requisition is on hold, the clock pauses and both parties are notified in writing.
Changes to the role: any change to requirements, pay range or location after intake resets the slate timeline.
Review: targets reviewed on [date] and every [quarter] after.
Signed: [Recruiter] / [Hiring manager] / [Date]
Metrics to put in your SLA
| Metric | How to calculate it | Owner |
|---|---|---|
| Time to first slate | Days from intake to first candidates presented | Recruiter |
| Feedback turnaround | Average business days from candidates sent to manager decision | Hiring manager |
| Interview-to-scorecard time | Average days from interview to completed scorecard | Interviewers |
| Slate acceptance rate | Candidates the manager advances ÷ candidates presented | Shared (signals intake quality) |
| Time to fill | Days from requisition approval to accepted offer | Shared |
| Offer acceptance rate | Accepted offers ÷ offers made | Shared |
| SLA compliance | Commitments met on time ÷ total commitments, per party | Both |
Worked example: over a quarter, a recruiter sends 40 candidates to one manager, who responds within two business days on 26 of them. Feedback compliance is 26 ÷ 40 = 65%. If the manager advances 12 of the 40, slate acceptance is 30%, which suggests the intake brief needs another look. For more definitions, see our recruitment metrics list.
How to roll out a recruiting SLA
- Measure the current state. Pull dates for the last 10 to 20 hires: intake, first slate, feedback, interviews, offer. Find the two biggest delays.
- Draft targets from your data. Start with what you already hit most of the time, then tighten slightly. Unrealistic targets get ignored.
- Get leadership support. SHRM’s guidance stresses getting buy-in from hiring managers and leaders first, and framing the SLA as a way to help managers hire faster rather than as a policing tool.
- Pilot with willing managers. Run it with two or three managers for 60 to 90 days. Review results every two weeks.
- Make tracking effortless. Use your ATS or a shared tracker with one date column per stage. If tracking is manual, keep it to the stages you will act on.
- Report both sides. Share recruiter and manager compliance in the same report. Visible, two-way data keeps it fair.
- Adjust and expand. Change targets that proved unrealistic, then roll out by department.
If managers push back on time commitments, our guide to reducing hiring manager workload has ways to take tasks off their plate.
Adjusting the SLA by role type
| Role type | What changes |
|---|---|
| High-volume hourly | Shorter cycles measured in days; daily slates; same-day manager feedback; group or one-step interviews |
| Professional and technical | Standard targets; add a technical assessment step with its own turnaround |
| Hard-to-fill or niche | Longer slate time; smaller slates; weekly market updates from the recruiter |
| Senior and executive | Longer overall timeline; scheduled calibration meetings; confidentiality terms |
Common mistakes to avoid
- Writing commitments only for recruiters. If managers have no deadlines, the SLA just documents who to blame.
- Counting calendar days for some steps and business days for others. Pick one and say so.
- No pause rule. Roles go on hold; the SLA should say when the clock stops and restarts.
- Tracking too much. Five or six timestamps are enough to find bottlenecks.
- Ignoring recordkeeping. Federal rules at 29 CFR 1602.14 require employers covered by Title VII to keep application and hiring records for one year from the record or the personnel action, whichever is later. Make sure scorecards and decisions are saved in your system, not only in email.
Slow processes also cost you candidates; see our tips on preventing candidate ghosting and reducing time to hire.
How Careerscape can help
Careerscape is a U.S. staffing and recruiting firm. If your team can’t keep up with its own SLA, we can run part or all of the process through recruitment process outsourcing or fill specific roles through direct hire search, working to agreed turnaround times.
Frequently asked questions
What is an SLA in recruiting?
In recruiting, an SLA is a written agreement that sets the responsibilities and turnaround times for each step of the hiring process. Internally, it is between the recruiting team and hiring managers. With an outside agency, it is usually part of the service agreement and covers items like time to first candidates, communication frequency and replacement terms.
What should a hiring manager SLA include?
Include the scope (which roles), each party’s commitments with deadlines, how dates are tracked, how results are reported, what happens when a deadline is missed, a rule for roles put on hold, and a review date. Keep it to one page so people actually read it.
What is a good feedback turnaround time for hiring managers?
Many teams aim for one to two business days for resume feedback and one business day for interview scorecards. There is no universal standard, so look at your current averages and set a target slightly faster than what you achieve now. Strong candidates often have other options, so shorter is better.
How long should a recruiter SLA pilot run?
Sixty to ninety days is usually long enough to cover several requisitions from intake to offer. Shorter pilots may not include a full hiring cycle, while longer ones delay fixes. Review the data every two weeks during the pilot.
Is a recruiter SLA legally binding?
An internal SLA between recruiters and hiring managers is a working agreement, not a contract. An SLA with an outside recruiting agency can be part of a binding contract, so have it reviewed like any other vendor agreement.